Creating MAST model using State-AMS

VishwaVishwa Posts: 85
edited April 2018 in Saber Model Exchange
I need a model which should detect over voltage or under voltage at the input and should give a digital output ( 1 or 0) basing on the input condition (over voltage or under voltage respectively).This model can be easily created using State -AMS tool available in Saber Model Architect.
If input voltage is above 50V , I should get digital signal "1" at the output pin and if the input signal is less than 50V, I should get "0"  at the output.
The State-AMS model and the schematic attached for your reference.
Sign In or Register to comment.