Electric Sunroof

VishwaVishwa Posts: 86
Introduction:
The circuit represents a switch/power relay controlled sun roof assembly. The sunroof switch can operate in three modes: Up, Down, Off. The relay is connected to drive the window motor forward or backward and 12V DC source is used to illustrate the battery. The window mechanism depicts the mechanized window load operations.

Circuit Snapshot:
Refer to the attached snapshot "electric_sunroof.png".

How To Use:
1) Download the attached design folder "Sunroof.zip".
2) Extract the files to any location on your PC.
3) Invoke SaberRD 2015.03.
4) Open the design "sun_roof.ai_dsn".
5) Perform the analysis as per the settings given in the Quick Analysis box inside the schematic and plot the signals listed to understand the behavior of the design.
6) You can also choose to run the experiment that has the full setup of analyses, signals, measurements, min/max checks using the Experiment Analyzer tool. After the experiment is executed, you will be able to see the experiment report or log and a graph.

For more description on how to run the analysis and experiments, refer to the readme.txt available in the design folder.

Note:
This design works in SaberRD 2015.03 commercial version and as well as in student version. The only exception in student edition is one of the experiments named "MonteCarlo_Analysis" will not work due to pre-defined limitations and you will get a warning message when loading the design in student version. You can ignore the warning message and continue to run the simulation/analysis as usual.


Sign In or Register to comment.