Vishwa
Posts: **85**

My company often receives requests from Saber RD automotive users for NTC thermistor models compatible with Saber. The embedded model of NTC in Saber is really too simplistic. I have accurate spice models compatible with several spice software Pspice/Altium/Multisim/Tina TI ..etc but with even proper importation in Saber, the model does not function normally although the simulation succeeds on a software point of view.. I would like to know if there is a way to submit my simulation and get a look on it, in order to detect what`s not going right. Thanks.

- 148 All Categories
- Test_Category
- SaberEXP
- SaberEXP Design Examples
- SaberEXP Q&A
- 145 Physical Modeling & Simulation
- 57 Saber Answers
- 64 SaberRD Design Examples
- 12 Analog/Mixed-Signal Examples
- 16 Electromechanical Examples
- 36 Power Conversion Examples
- 1 SaberES Designer Examples
- 3 Saber Tech Tips
- 5 Saber Model Exchange
- 11 Saber Modeling Languages
- 4 SaberRD Videos
- 1 SaberES Designer Videos
- Latest News
- Support Issues

## Comments

1566*====================================================

*VISHAY NTCLE101E3C90173saber

*Voltage driven NTC. Package: Radial Leaded

*revision1: coefficients corrected

*Connections:

* Pin 1

* | Pin 2

* | | Temperature input

* | | |

.SUBCKT NTCLE101E3Csabernew 1 2 Tin

R1 Tin 0 1T

Vsense 1 N002 0V

B3 N002 2 V= I(Vsense)*Rntc(V(Ttot),beta)

B1 N003 0 V= V(Tin)

B2 Ttot N003 V= +abs(V(vcth))

R2 Ttot 0 1T

R4 Vcth N001 1

C1 0 Vcth {Cth/Gth}

B4 N001 0 V= +abs(V(1,2)*I(Vsense))/Gth

.FUNC Rntc(x,y)

+ {if(x<25,+Rref*exp((y-Beta)*(1/(x+273.15)-1/(273.15+Tref)))*exp(B*(pwr(1/(273.15+x),1)-pwr(1/(273.15+Tref),1))+C*(pwr(1/(273.15+x),2)-pwr(1/(273.15+Tref),2))+D*(pwr(1/(273.15+x),3)-pwr(1/(273.15+Tref),3))),

+ +Rref*exp((y-Beta)*(1/(x+273.15)-1/(273.15+Tref)))*exp(B1*(pwr(1/(273.15+x),1)-pwr(1/(273.15+Tref),1))+C1*(pwr(1/(273.15+x),2)-pwr(1/(273.15+Tref),2))+D1*(pwr(1/(273.15+x),3)-pwr(1/(273.15+Tref),3))))}

.PARAM A=-12.89228328

.PARAM B=4245.148

.PARAM C=-87493

.PARAM D=-9588114

.PARAM a1=-12.89228328

.PARAM b1=4245.148

.PARAM c1=-87493

.PARAM d1=-9588114

.PARAM Gth=0.0068

.PARAM Rref=10000

.PARAM tolB=0.01

.PARAM tolRref=0.01

.PARAM Tref=25

.PARAM Cth=0.0476

.PARAM beta=3435

.IC V(vcth)=0

.ENDS NTCLE101E3Csabernew

In attachment, the macromodel of this part, and a capture of the voltage variation in time at node Therm, for a variation of V2 from 25 to 85.

15Hi Alain,

I was able to successfully translate the model you gave. Attached the files.But the model does not give right result. I get only 500u at node therm always.

I have checked the translated model line by line to see if all equations were translated correctly. Could not find errors.

Could you please confirm that the one you are showing in screenshot is the netlist.txt model what you sent us? Or did you do any modifications in that model?

Regards,

Hema

6I got the same result as you in Saber Student. And I used the same netlist in LT spice in order to reach the result displayed.

Are the following features of the netlist supported in Saber (.IC .FUNC PWR(,) etc)

Thanks a lot

6.SUBCKT NTCLE101E3Csabernew2 1 2 Tin

R1 Tin 0 1T

Vsense 1 N002 0V

B3 N002 2 V= I(Vsense)*Rntc(V(Ttot),beta)

B1 N003 0 V= V(Tin)

B2 Ttot N003 V= +abs(V(vcth))

R2 Ttot 0 1T

R4 Vcth N001 1

C1 0 Vcth {Cth/Gth}

B4 N001 0 V= +abs(V(1,2)*I(Vsense))/Gth

.FUNC Rntc(x,y)

+ {if(x<25,+Rref*exp((y-Beta)*(1/(x+273.15)-1/(273.15+Tref)))*exp(B*(pwr(1/(273.15+x),1)-pwr(1/(273.15+Tref),1))

+ +C*(pwr(1/(273.15+x),2)-pwr(1/(273.15+Tref),2))+D*(pwr(1/(273.15+x),3)-pwr(1/(273.15+Tref),3))),

+ +Rref*exp((y-Beta)*(1/(x+273.15)-1/(273.15+Tref)))*exp(B1*(pwr(1/(273.15+x),1)-pwr(1/(273.15+Tref),1))

+ +C1*(pwr(1/(273.15+x),2)-pwr(1/(273.15+Tref),2))+D1*(pwr(1/(273.15+x),3)-pwr(1/(273.15+Tref),3))))}

.PARAM A=-12.89228328

.PARAM B=4245.148

.PARAM C=-87493

.PARAM D=-9588114

.PARAM a1=-12.89228328

.PARAM b1=4245.148

.PARAM c1=-87493

.PARAM d1=-9588114

.PARAM Gth=0.0068

.PARAM Rref=10000

.PARAM tolB=0.01

.PARAM tolRref=0.01

.PARAM Tref=25

.PARAM Cth=0.0476

.PARAM beta=3435

.IC V(vcth)=0

.ENDS NTCLE101E3Csabernew2

15Hi Alain,

While conversion, in line 75 there was a portion getting commented out.

Corrected line: i(n002->m_2) += ri_0 ; ri_0 : v(n002,m_2) = i(v.sense)*rntc(v(ttot),beta) # b3

Attached the files. Now the simulation result looks correct. Kindly check and let me know.

6Thanks.

I hadn't seen this message earlier than now because I was out of office for a while and haven't had the occasion to look at the Saber forum. I will do it tomorrow as Saber student is installed on my home computer.

Great news if this works......

6The simulation is now working fine. Thanks to you and all the Saber team.